BDC Vapor Seal is a two component, 100% solids, low viscosity, moisture accepting epoxy primer. It has an ability to reduce the hydrostatic pressure emitted by the floor from 12 lbs per 1000 square feet to less than 1 lb. BDC Vapor seal can even cure underwater without affecting its adhesion. When applied at 73°F / 50% humidity, BDC Vapor Seal is a 5-7 hour cure.
Uses
BDC Vapor Seal can be used to prime concrete, metal, and wood. Corrosion inhibitors can be added (by special request) for use over metal substrates. It is an excellent all around concrete primer/sealer with incredible adhesion.
Key Features:
Meets USDA criteria
100% Solids
Low Viscosity
SCAQMD VOC Compliant (VOC = 0g/l)
High Build
Moisture Tolerant
Convenient 2:1 Mix; A:B=2:1
Superior Adhesion
Packaging
1 1/2 gallon kits (1 gallon part A & 1/2 gallon part B)
15 gallon kits (10 gallons part A & 5 gallons part B)
Coverage
The proper coverage of BDC Vapor Seal varies on the level of moisture vapor emissions discovered on the job. Typical application should cover 200 ft2/gal (8 mils). If an excessive amount of Vapor Pressure is present ( > 8 lbs/1000 ft2/24hr), BDC Vapor Seal should be applied in multiple coats to achieve a minimum of 16 mils (2 coats at 200 ft2/gal). With the right surface preparation, this extra protection should provide protection up to 15lbs.
BDC Vapor Seal may be applied at a heavier rate to achieve a higher build system or to accommodate the broadcasting of aggregates.
Coverage will vary depending on condition of surface and desired thickness.
Packaging
Coverage Rate
1.5 gal kit
15 gal kit
*Based on coverage rate of 200 sq. ft. / gal @ 8 mils.
300 sq. ft. / kit
3,000 sq. ft. / kit
The proper coverage of BDC Vapor Seal varies on the level of moisture vapor emissions discovered on the job. Typical application should cover 200 sq. ft / gal (8 mils). If an excessive amount of Vapor Pressure is present ( > 8 lbs/1000 ft2/24hr), BDC Vapor Seal should be applied in multiple coats to achieve a minimum of 16 mils (2 coats at 200 ft2/gal). With the right surface preparation, this extra protection should provide protection up to 15 lbs. BDC Vapor Seal may be applied at a heavier rate to achieve a higher build system or to accommodate the broadcasting of aggregates.
What They Say About Us
Don’t take our word for it. Listen to the people around the country who rely on Coatings Hub.
Patrick
Rating
80%
I have purchased BDC 8400┃Pebble Bond Epoxy and this products helped me. Also customer dealing is great.Must Buy from Coatinghub
All The Names You Love In One Location
Use your brand consistently. Explore all our new arrivals in exclusive brands selection.
Subscribe Newsletter
Subscribe to our newsleter and stay up to date with promotions, offers & website updates.